Applying Nano Ceramic coating with Nasiol ZR53
2022 Most Updated! How to Apply Ceramic Coating Correctly?

People often ask us how to apply ceramic coating to get the maximum level of car paint protection.

We already gave many tips and advice about applying nano ceramic coating products in our previous posts, but they were fragmented.

In this post, we want to gather all of these pieces into one article and create a short tutorial or action plan for all of our customers.

As an example,

We will take the Nasiol ZR53 9h Car Ceramic Coating, but if you use other car nano protection products, this action plan will work just as well.

By the way, each Nasiol product comes with a detailed multi-language manual, so please do read this before using any product.

Where to Start Doing Ceramic Coating for Cars?

First of all, you have to prepare a car for covering it with a nano car paint shield. It’s the most challenging and annoying part of the whole process.

  1. Find a shady place for your car. After applying the nano ceramic coating, a vehicle shouldn’t stay in the sun. This is a mandatory requirement.
  2. Thoroughly wash your car. You should wash out any contaminants such as mud, dust, bird droppings, or smashed insects.
  3. Dry your car with a clean microfiber towel which is bundled in the Nasiol car paint protection product.

 

Car Ceramic Coating Application Video

 

Car Scratch Removal

If you want to apply nano ceramic coating layer perfectly, you should get rid of any hints of scratches and bumps. A special detailed clay will help you to deal with this. Also, it helps to remove any last tiny particles of the dirt.

The Magic Moment of Applying Ceramic Coating for Cars

It’s the moment we have prepared for. Before starting to apply you should necessarily put on protective gloves; don’t neglect this recommendation.

  1. Pour Nasiol ZR53 on the application pad and apply it to the surface by criss-cross technique. Using a special pad, you should spread nano ceramic coating evenly on the element. As always, we say: “Don’t move to the next element until you finish the current one”.
  2. Immediately wipe the covered surface with the first microfiber cloth and take the residue of the product.
  3. After wiping with the first microfiber, buff the surface with the second
  4. Leave your car in the shade for 48 hours.
  5. Enjoy the ultimate gloss of your car.

That’s all there is to it. As you can see it’s not a complicated process. You should only be attentive and patient.

If you have any other questions or if something isn’t clear, please leave commentaries under this post and we will do our best to reply.

nano coated leather couch with nasiol leatherboost
How to Clean a Couch—First Aid When You Have Stains on the fabric
PREVIOUS POST
Nasiol European Coordination Center Expanded
NEXT POST
  1. Peter says:

    I have 3 questions......
    1) If I am unable to keep the car in shade for 48 hrs can the car be covered with a car cover?
    2) Can I multi coat with ZR53 and if so .....when?
    3) can ZR53 be used on rims?
    Thanks

    1. Nasiol Expert says:

      Hi Peter,

      Thanks for your questions. Our sales team will contact you soon. Best Regards,

  2. Nasiol Expert says:

    Hi Peter,

    Please find the answers to your questions below.

    1. Yes, you can cover it somehow but it better to keep the car in a garage. There should be no water contact.

    2. Just one layer of ZR53 will be enough for perfection but you can coat max 2 layers. No more. 48 hours curing time break between each layer.

    3. Yes, it can be used on the rims as well. Nasiol MF2 would be a second option.

  3. Ali says:

    If I am living in Dubai and the weather her is very hot, no rain or water will be in the car. Do I need to keep the car 48 hours.

    I applied your product and I drove the car after 2 hours and I am sure it is dry and no water will touch the car. Is it wrong?

    1. Nasiol Expert says:

      Thank you, Ali, for your message. Twenty-four hours curing time should be enough as long as no water has touched the surface. If you didn’t observe any defects on the surface after driving, you don’t need any further action; you can continue operating. To double-check, please check the water repellency of the treatment by pouring water and see what effect it does have, and this will show you if the ceramic coating layering is active and working as it is supposed to. Take a video of the process if you like and send it to us. Let us know if you have any additional questions.

  4. ivan says:

    after successful application of ZR53, can we still use clay bar for subsequent regular car washes?

    1. Nasiol Expert says:

      Hello Ivan,

      Thank you for your message.

      Since ZR53 prevents dirt, dust, etc., sticking on to the surface, you wouldn't need to use a clay bar during regular washing of your vehicle.
      For further questions, you may contact our sales team on [email protected]

  5. gabbar garage says:

    Impressive! Thanks for sharing this.
    https://gabbargarage.pk/

    1. Nasiol Expert says:

      Thank you for your comment.

  6. gabbar garage says:

    You’re doing a great job Man, Keep it up.
    https://gabbargarage.pk/

    1. Nasiol Expert says:

      Thank you for your comment.

  7. ceramic coating says:

    great

    1. Nasiol Expert says:

      Thank you for your comment.

  8. ceramic coating says:

    nice

    1. Nasiol Expert says:

      Thank you for your comment.

  9. Tex Hooper says:

    Great tip about using microfiber cloths on pottery for precision. I want to take a pottery class with my wife. That way we can have a creative outlet on our dates. https://blossomhousepottery.com/

    1. Nasiol Expert says:

      Thank you for your comment. We will continue to share useful information. Stay tuned for more useful information.

  10. Rafael says:

    Hello! I’ve two questions about the ZR53.

    1. I saw the previous reply ablut applying a second layer. We must wait about 48h between each layer applied. My question is: can i use my car during the waiting period? If so, how should i proceed on washing period? Just rising off the paint with a pressure washer is enough?

    2. How long the ZR53 should keep working on Wheels surface? Regular using car and making proper maintenance?

    1. Nasiol Expert says:

      Hello! Here are the answers:
      1) You should apply ZR53 only 1 layer. Keep the coated surfaces away from direct sunlight, the elements, various types of contamination, and water exposure for 24 hours. Please wait 48 hours for the nano coating to cure and become resistant to abrasion and chemicals, before any detergent-based washing.
      2) ZR53 is not applicable for wheels. You can use DetailerShine https://www.nasiol.com/detailer-shine-trim-and-tire-shine/

Leave a Reply to Nasiol Expert Cancel reply

Your email address will not be published. Required fields are marked *