Anti-GRM Antigrafiti nano clear coat for metal, painted and hard surfaces
• Anti GRM is the best anti-graffiti coating which has the last enhanced non-sacrificial formula and specially developed for metal and painted surfaces as well as can be applied on other hard surfaces like glass and plastic.
• The anti-graffiti clear coat bonds to surface chemically with an ultra-thin layer of approximately 500 nm which makes it hard to remove from the surface. Peeling of the coating cannot occur like conventional anti-graffiti products. The product is a specialized anti-graffiti coating for metal, painted and hard surfaces which provides maximum longevity, cleaning efficiency, and product consumption.
• REACH cerfitified and low VOC formula apply to all environmental and health regulations on world. • Apart from its ultimate antigraffiti benefits, it protects surface from stain, debris, harsh conditions and increase longevity of applied surface.
• Anti-graffiti clear coat is transparent and thanks to its technology that one component and one coat product can stand durable up to 3 years.
• Thanks to the specialized formula for metal, painted and hard surfaces, so that product consumption is very low that yields to cost efficiency and environmental. All of these factors make anti-GRM is the best anti-graffiti coating.
• A simple stage pressure washing or wipe down with a microfibre cloth will be enough to remove all grafitti from surface. Cutting edge technology enables less and extremely easy cleaning times when compared to conventional products.
Application of the anti-graffiti coating for metal is easy and affective clean the surface and be sure that there is no dirt, detergent and water residue. Spray with an airless spray and buff with a microfibre cloth or mop for hard to reach areas. Clean the airless sprayer with White spirit after usage or if you will not use sprayer more than 15 minutes. Allow the Anti-GRM to cure for at least 12 hours sheltering from dirt and water.
Product Data Sheet