Solar
Rinse

Cleaning Detergent for Solar Panels

Keep your solar panels clean to ensure optimal performance and energy efficiency!

Solar panels are one of the most efficient and eco-friendly methods of generating electricity, but they require regular maintenance to perform at their best. The primary cause of energy loss in solar panels is soiling. Organic contaminants like dust, bird droppings, pollen, carbon deposits, and other debris are commonly found on the surface. As these particles accumulate, they can not only reduce the panels' efficiency but also shorten their lifespan.

SolarRinse Benefits

Ready-to-use product.
Cleans water spots and removes hard stains easily.
Efficiently eliminates organic soiling from solar panels.
Suitable for all solar panel types, including photovoltaic and thermal.
Can be used with cleaning robots or manual cleaning tools.
Non-toxic and safe formula that won’t harm the panels.

How to Apply SolarRinse?

Rinse the panels initially with water.
Spray the product directly onto the panel surface.
Leave to act for a few seconds.
Brush or mop the entire surface of the panels to remove or loose all dirt present on the solar modules.
Rinse the panels with water to remove any dispersed dirt or excess of product left on the panels.
Let the panels dry.

Why Choose Our Solar Panel Cleaning Solution?

Gentle Yet Effective Cleaning
Our formula is specially crafted to clean your solar panels without damaging the delicate surface or the protective nano coatings. It effectively removes dirt, dust, bird droppings, pollen, and other debris that can block sunlight, without leaving residue or streaks.

Eco-Friendly Formula
Nasiol SolarRinse is environmentally friendly cleaner, using non-toxic and low-VOC ingredients that are safe for both your solar panels and the environment. It’s the ideal choice for anyone looking for a safe cleaning option.

Maximize Solar Efficiency
Regular cleaning with SolarRinse ensures your solar panels maintain maximum efficiency by allowing more sunlight to reach the photovoltaic cells. This helps you get the most out of your solar system, boosting your energy production.

Protects Your Investment
Keeping your solar panels clean not only improves their efficiency but also extends their lifespan. Our cleaning detergent helps protect your panels from the buildup of contaminants, preventing long-term damage.

Cleaning Detergent for Solar Panels

Solar panels are exposed to various environmental factors, including dust, dirt, and bird droppings, which can obstruct sunlight and reduce their efficiency. Regular cleaning ensures that your panels capture as much sunlight as possible, enhancing their performance and extending their service life. Nasiol SolarRinse makes this task easy, efficient, and safe.

FAQs

What is SolarRinse used for?
SolarRinse is a specialized detergent designed for cleaning solar panels. It not only removes dirt and grime but also acts as a water spot remover, helping to restore panel clarity and improve energy efficiency.
Is SolarRinse just a regular detergent?
No. Unlike common detergents, SolarRinse is formulated to break down and eliminate all contaminants and water spots that standard cleaners leave behind. It’s a professional-grade product developed specifically for solar panel maintenance.
How do I apply SolarRinse?
Start by pre-wetting the solar panels with water. Then spray SolarRinse onto the panels and leave to act for 1–2 minutes to break down dirt and water spots. Use a soft brush or non-abrasive cleaning pad to gently scrub the surface. Finally, rinse thoroughly with water to remove all residues. Make sure no detergent remains before drying or proceeding with coating.
Does SolarRinse need to be rinsed off after application?
Yes, absolutely. Rinsing is required. After applying SolarRinse, the panel must be thoroughly rinsed with clean water to remove all residues and ensure no streaks or spots are left on the surface.
Why is rinsing so important?
If not rinsed properly, residues from the detergent may dry on the panel and reduce light transmission. Rinsing ensures the panel surface is completely clean and ready for either final use or nano coating application.

Does SolarRinse foam during application?
No. SolarRinse is a non-foaming formula. This is intentional, as foaming agents can leave residue and are harder to rinse off. SolarRinse makes it easier and faster to use, especially over large panel surfaces.
Why doesn’t it foam like typical detergents? Is it working?
Yes, it is working exactly as intended. The non-foaming design allows for easier rinsing and leaves no suds behind, which helps prevent residue that could attract dust or reduce panel performance.
Can SolarRinse be used with pressure washers or automated cleaning systems?
Yes. SolarRinse is compatible with both manual and mechanical cleaning systems.
Does it improve solar panel efficiency?
By removing both visible dirt and invisible water spots, SolarRinse helps restore maximum light transmission through the panel surface, contributing to improved panel performance.
Can I apply nano coating immediately after using SolarRinse?
Yes, but only after thoroughly rinsing and allowing the panel to dry completely. For best results, follow with our Pre-Cleaner product SolarClean before applying the nano coating.

Solar Rinse

Cleaning Detergent for Solar Panels

SolarRinse Benefits

How to Apply SolarRinse?

Why Choose Our Solar Panel Cleaning Solution?

Cleaning Detergent for Solar Panels

FAQs

What is SolarRinse used for?

Is SolarRinse just a regular detergent?

How do I apply SolarRinse?

Does SolarRinse need to be rinsed off after application?

Why is rinsing so important?

Does SolarRinse foam during application?

Why doesn’t it foam like typical detergents? Is it working?

Can SolarRinse be used with pressure washers or automated cleaning systems?

Does it improve solar panel efficiency?

Can I apply nano coating immediately after using SolarRinse?

Solar
Rinse