MARINECOAT ONE NANO CERAMIC COATING FOR MARINE GELCOAT PROTECTION
150mL / Durability up to 1 season underwater, 2 seasons in above-water parts
Nasiol MarineCoat One is an ultimate nano ceramic coating for gelcoat of marine vehicles and plastic parts, which protects your vehicle against scratches, acid rains, UV irradiation, detergents, and several chemicals. Removing exhaust smoke with the coated surface is more manageable, and you don’t need harsh chemicals to clean your boat.
Antifouling
UV
Resistance
CRYSTAL
Gloss
EASY
to clean
MARINECOAT ONE GELCOAT NANO PROTECTION
Why MarineCoat One?
- Matchless gloss effect
- High chemical and UV resistance
- Very easy-to-clean properties
- Provides antifouling features
- Protects the original color of the vehicle
APPLICATION SURFACES
Nasiol MarineCoat One can be applied to gelcoat and topcoat of marine vehicles, as well as plastic parts.
MARINECOAT ONE APPLICATION AND SPECIFICATIONS
Click to Download PDF
APPLICATION
- Comsuption is 4-5 mL /m . Surface should be absolutely clean and dry. Ensure that the temperature and relative humidity (RH) values (+5°C ~ + 30°C / 41°F ~ 86°F / 50% RH). Wear the protective nitrile gloves included in the box. Shake product gently before use. Place a suede cloth onto the applicator block’s sponge surface. Pour the necessary amount of product onto the suede cloth. Spread the product gently over the surface in a crisscross motion. Once beading occurs gently wipe the excess product off from the surface using the light gray Nasiol microfiber cloth in linear motions. To make the most of microfiber cloths, fold each one four times before After wiping the surface with the light gray microfiber cloth, complete the final buffing process by gently using the dark gray Nasiol microfiber cloth in circular motions.
- Keep the coated surfaces away from direct sunlight, the elements, various types of contamination, and water exposure for 24 hours. Please wait 48 hours for the nano coating to cure and become resistant to abrasion and chemicals, before any detergent-based washing.
NASIOL MARINECOAT ONE SPECIFICATIONS
| Packaging | 150 mL |
| Appearance | Colorless liquid |
| Chemical Resistance | 12>pH>1 |
| Salt Water Resistance | Yes |
| Moisture Resistance | Yes |
| Pencil Hardness (ISO-15184:2012) | 10H |
| Dry Film Thickness | 800-1100 nm |
| Consumption per Unit Area | 4-5 mL/m2 |
| Density @23°C | 0.87 g/cm3 |
| pH Value | 5,5-6 |
| Dry to Touch Time | 4h |
| Application Temperature | 5°C-30°C ( 50%RH) |
| Temperature Durability | 150°C |
| Water Contact Angle | 107° @10 μL |
| Water Contact Angle After “3000 Wet Scrub (ISO-11998:2006) |
101° @10 μL |
| Water Sliding Angle | 11° @20 μL |
| Oil Contact Angle | 87° @10 μL |
| Gloss Rate @60° (ISO-2813:2014) | 96 (Acrylic) |
| REACH Compliance | Yes |
Click to Buy
Submit your review | |
Do you also sell a coating on a glassplate for 10 euro's? It must be biometic.
This product works fine on my sailboat. I used to shore it to get rid of fungi gather over my hull and spend a lot of time to refine. Anti Moss incredibly prevents the recruitment of seaweed, fungi, mussel etc. on my boat, loved it.
Hi from Mexico. I tried it on my yacht. Incredible result. I will take a video and send you ...Thanks guys !!
9 letters is enough to explain its magic .. '' EXCELLENT ''
No more moss formation on ceramic painted bodies of yachts. I have come with wonderful results and strongly suggesting you.
