You used that nonslip, ceramic-coated paint to make your car slippery and give it water-beading paint quality. It is extraordinary initially. Liquid would fall on the surface and would roll off. After a few months, however, you might find yourself in a different position. The water does not form as compact as beads. The sleek, glossy thing seems less slick.
Does that delaminate of your coating imply your coating has failed? Not in the least.
Ceramic coatings are so tough that even their most outer layer consisting of protective hydrophobic (water-repelling) coating can wear off with wear. The good part is that you can simply increase water repellency and ensure that your car always looks the best it can.
Why Your Coating’s Hydrophobic Effect Weakens
Think of your ceramic coating like a strong, clear shield. This shield is always protecting your car’s paint. But that shield faces constant attack:
- Sun and UV Ray: Long exposure may affect the coating surface.
- Dirt and Grime: Road tar, dust and pollution lays a layer above your coating, rendering its hydrophobic aspects useless.
- Incorrect Wash: Mixing up soaps and chemical cleaners could take away the slickness of the coating.
- Self Executes Washes: Bear in mind that numerous, use of stiff brushes and harsh cleansers that arm the protective coatings.
Those things aren’t actually damaging the coating itself, they can just degrade the coating’s ability to be water-repellent. This is a normal condition and can be repaired.
These factors don’t destroy the coating itself, but they can weaken its water-repelling power. This is completely normal and can be fixed.
Simple Tips to Maintain and Restore the Beading
Maintaining that just-coated look is easier than you think. Follow these simple maintenance tips.
1. Wash Your Car the Right Way
How you wash is the most important factor. Always use a pH-neutral shampoo designed for coated cars. These shampoos are gentle and won’t harm the coating. Wash your car in the shade using a soft microfiber mitt and the two-bucket method to prevent scratches. Regular washing removes the contaminants that are smothering your coating’s hydrophobic effect.
2. Dry It Gently and Thoroughly
After washing, dry the car with a clean, soft microfiber towel. Letting it air dry can leave water spots, which contain minerals that can etch into the coating’s surface over time, further reducing its performance.
3. Use a Ceramic Coating Maintenance Spray
This is the secret weapon for how to maintain ceramic coating performance. A high-quality maintenance spray, also known as a hydrophobic booster, does two things:
- It adds a fresh layer of protective polymers on top of your existing coating.
- It instantly revives the deep gloss and that incredible water-beading effect.
Think of it as a quick top-up for your coating’s power. Using a booster spray every 2–3 months after washing your car will keep the protection strong between washes. However, don’t think of it as something that must be used regularly on a strict schedule. Instead, consider it an optional enhancement you can apply whenever you feel the hydrophobic effect has diminished and you want to restore the slickness and water-beading performance. Application with a hydrophobic booster spray is a very straightforward job. This is a quick tutorial focusing on the general rules of escapade:
- Wash Your Car: This is the first step that you need to take. You must wash your car using a neutral shampoo. This is a very important action to take.
- Dry the Surface: Wipe down the car with a microfiber towel.
- Apply the Booster Spray: Then apply a little product at a time to one panel at a time (e.g. the hood or a door).
- Divide and Conquer: Simply spray the product onto the panel and wipe it evenly using a clean, soft microfiber cloth until no streaks remain.
- Next panel: Repeat the procedure.
You will notice the difference at once. The surface will be slipperier and the next time it rains you will be welcomed by the perfect, tight water beads.
Choosing the Right Hydrophobic Booster for Your Car Coating
Not all sprays are set up equal. In order to substantially increase water repellency, you require a product that is suited to handle pro-grade materials.
A better alternative is Nasiol MetalCoat F2 This superior formulation is specially designed to boost and prolong the life of ceramic coatings. It doesn’t? It just covers the problem; it sticks to your existing coat and repairs its hydrophobic finish and forms a second line of defense on behalf of contaminants and UV rays. It is the ideal ceramic coating care spray to anyone who wishes to maintain his or her car in showroom conditions.
Don’t let the shine fade. Restore the hydrophobic power of your coating with Nasiol MetalCoat F2.
